Ozone Swim 1000, 2000 and 3000 series User Manual
–
JULY 2017 ENG rev 2.0
P a g e
2 | 15
Important Safety Information
This manual contains important information about the operation and safe use of this
product.
•
READ AND FOLLOW ALL INSTRUCTIONS
. IMPORTANT SAFETY INSTRUCTIONS
PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
•
WARNING
–
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning the
use of the appliance by a person responsible for their safety. Children should be
supervised to ensure they do not play with the appliance.
•
WARNING
–
Do not open Electronic Control Unit. There is no user-serviceable part in
the control box. Repairs are only to be made by an Ozone Swim qualified technician,
if the supply cord is damaged, it shall only be replaced by the manufacturer or its
service agent or similarly qualified person to avoid a hazard
•
WARNING
–
Do not operate electrolytic cell without proper flow or water circulation
as this may cause damage to the unit.
•
CAUTION
–
This unit is not intended for use with temporary or fold-able/storable
pools. All pipe-work associated with this system is intended to be fixed and should
remain intact following installation by qualified personnel
Ozone Swim Pool Purification Systems
Congratulations on your choice of an Ozone Swim pool purification system for your
swimming pool. The Ozone Swim you have purchased is designed for easy and
simplistic operation and maintenance.
Please take the time to read these instructions thoroughly before attempting to
operate your unit. Should you require additional information or further assistance do
not hesitate to contact your local Ozone Swim representative or visit our website
www.ozoneswim.com.au
Note
: If you are using this system for pools with integrated Spa, you may require a
degas vessel if the pool return goes to the spa first. Alternately, your installer may fit
a flow switch to idle the system while the spa is in use.
Note
: For installations where the filter/chlorination system is below the level of the
pool, a drain valve must be fitted to keep the ozone outlet line dry should any water
backflow through the line. This drain valve is available from Ozone Swim.
