Brammo Enertia 2010, Owner'S Manual, Page: 90 / 92

Quick Reference
Quick Reference 90
Power Up the Enertia in DRIVE mode.
1. Insert Key into the Ignition Switch.
2. Turn the Ignition Switch clockwise to the ON Position.
3. Press and Hold the Tank Button.
4. Enertia will power up in the DRIVE Mode.
Enable the Drive System and Riding the Enertia
1. Put the Kickstand Up.
2. Turn the Headlight ON.
3. Place the OFF/ON switch in the ON position.
The drive system will energize. Immediately, you will hear a small relay “click” under
the seat followed by the main contactor “click” from the motor area.
The “GO”
indicator on the dash will illuminate and the 4 LEDs above the LCD will blink indicating
that the Enertia has successfully entered a safe operational state in DRIVE MODE.
Carefully twist the throttle towards you to apply power to the motor, your Enertia will
accelerate. Twist the throttle away from you to remove power from the motor, your
Enertia will slow. The Enertia has no clutch or gears to operate, simply use the throttle
and brakes to control your speed.
Press and Hold the Tank
Button until bike powers up
ON Position
OFF Position
ON/OFF Switch
Headlight Switch
   
WARNING
The throttle is live, use
extreme caution.