Brammo Enertia 2010, Owner'S Manual, Page: 65 / 92

Drive Chain
Lubrication
( Refer to Safety Precautions on pages 44 & 45 )
Lubricate with a high quality lubricant every 250 miles (400km), or sooner if chain appears dry. When
operating in wet, hot, dry and/or dusty conditions, you may need to lubricate the chain more frequently.
Apply a moderate amount so lubricant penetrates between pins, rollers and bushings.
Lubricant:
SAE 80 or 90 Gear Oil
Aerosol Lubricant
designed specifically for motorcycle chains (apply as directed on can)
Removal, Cleaning & Replacement
The chain has a clip master link that can be removed. Removal of the chain is not required for
maintenance. Should you need to remove the chain for maintenance, use pliers to remove the clip,
remove the master link, and then carefully remove the chain. When you reinstall the chain, verify that
the closed end of the clip is facing towards the drive direction of the chain.
Clean the side surfaces of the chain with a dry cloth. Use a high flashpoint solvent such as kerosene
(paraffin oil) or a biodegradable degreaser. Never use harsh solvents or chemicals, such as gasoline, to
clean the chain. Never use a wire brush to clean the chain. Never use high pressure washers to clean the
chain. Let the solvent dry, but make sure to lubricate the chain within 10 minutes of the solvent drying.
Replacement chain:
DC 420HD 124L (stock Standard Roller Chain)
or
DC 420MO 124L (alternate O-Ring Chain)
Servicing Your Enertia 65

 

WARNING
Immediately replace any chain that has come in contact
with battery acid. Always immediately clean a chain after
contact with rock salt or salt water. Always lubricate after
cleaning.
Aerosol Lubricant
Master link clip orientation
SAE 80/90 Gear Oil