Brammo Enertia 2010, Owner'S Manual, Page: 23 / 92

Setting the Time
The time and date on your Enertia were set at the factory to Pacific Standard Time. If you need to adjust the time on your
Enertia:
Controls & Instruments 23
Entering SETUP MODE.
1. Turn the handlebar all the way to the left (or right).
2. Insert key into the ignition.
3. Push in on the key and turn it to the LOCK
position (counterclockwise).
4. Release the key, then continue turning the
key to the CHARGE position (counterclockwise).
5. Press and hold the Dash MODE button.
6. Press and hold the Tank Button
7. Enertia will power up in the SETUP mode.
8. Adjust the hour by pressing the TRIP button.
9. Push in on the key and turn it to the OFF position
(clockwise).
CHARGE
Position
OFF
Position
Press and hold the Tank
Button until bike powers up
Press and hold the
dash MODE button.
Press the TRIP button
to adjust the hour.