Brammo Enertia 2010, Owner'S Manual, Page: 21 / 92

Controls & Features
Motor Controller OFF/ON Switch
The motor controller OFF/ON switch is used to turn the motor controller off and on. Before powering up the Enertia in the
DRIVE Mode, ensure that the OFF/ON switch is in the OFF position.
RIGHT HANDLEBAR
ON Position
OFF Position
   
NOTE
If the OFF/ON switch was in the ON position prior to
powering up the Enertia in the DRIVE Mode, you
must place the OFF/ON switch in the OFF position
and then to the ON position to power up the motor
controller.
   
WARNING
The throttle could be live when the
OFF/ON switch is placed in the ON
position. Use extreme caution.
To operate, after the Enertia is powered up in DRIVE Mode:
Place the OFF/ON switch in the ON position to power on the
motor controller.
Place the OFF/ON switch in the OFF position to power off the
motor controller.
Only place the OFF/ON switch in the ON position when
you’re ready to ride. When parking for any length of time,
for safety, it is recommended that you power off the motor
controller by placing the OFF/ON switch in the OFF position.
Controls & Instruments 21