Brammo Enertia 2010, Owner'S Manual, Page: 73 / 92

If You Have a Flat Tire
Emergency Front Wheel Removal/Installation
(
Refer to Safety Precautions on pages 44 & 45
)
We recommend wheel removal be done only by your BRAMMO Authorized Service Agent or another qualified mechanic. Do not attempt to remove the
wheel on your own. Wheel removal requires mechanical skill and professional tools.
Troubleshooting 73
Removal
1. Park your Enertia on a firm, level surface.
2. Support the Enertia securely and raise the front wheel off the ground using a safety stand or a hoist.
3. Remove the axle bolt (3).
4. Loosen the 4 axle pinch (4&5) bolts.
5. Remove the axle (6) and wheel.
6. Avoid depressing the front brake lever.
Installation
1. Position the wheel and insert the front axle (6).
2. Verify that the axle is fully seated, torque the 2 right side pinch bolts (5) to 4.5ft-lbs (6.1Nm).
3. Install and torque the axle bolt (3) to 40.6 ft-lbs (55Nm).
4. Torque the left side pinch bolts (4) to 4.5ft-lbs (6.1Nm).
If a torque wrench was not used for installation, see your BRAMMO Authorized Service Agent as soon as
possible to verify proper assembly. Improper assembly may lead to loss of braking capability.
1
5
3
4
2
6