Warning Symbol
Use the Manual
The Symbol calls attention to an operating procedure, practice, or
the like, which, if not correctly performed or adhered to, could result
in personal injury or damage to or destruction of part or all of the
product and system. Do not proceed beyond a warning symbol
until the indicated conditions are fully understood and met.
Installers
System Designer
Expert User
Read Chapter 1, 2
Read All Chapters
Read Page 12
NOTE:
It is strongly recommended that a process should incorporate
a LIMIT CONTROL like L91 which will shut down the equipment
at a preset process condition in order to preclude possible
damage to products or system.
Information in this user's manual is subject to change without notice.
Copyright
a
October 2000, Brainchild Electronic Co., Ltd. all rights
reserved. No part of this publication may be reproduced,
transmitted, transcribed or stored in a retrieval system, or translated
into any language in any form by any means without the written
permission of the Brainchild Electronic Co., Ltd.
UM0L911C
2
This manual is applicable for the products with software version
19 and later version.
