Brahler DIGIMIC, Operating Instructions Manual

Page: 27 / 46

Single operation mode
DIGI MIC®
wireless 27
Charging the battery pack
There are two options of charging the battery pack.
Charging via power supply
For a quick charging of a single wireless delegate unit an external power supply (05.0902) is required. You
do not need to remove the battery pack from the DDoc. Just connect the plug to the connector of the DDoc.
Important: The discussion function of the unit is disabled when the external power supply is
connected. Charging with the external power supply is only possible if the unit is not in use.
Charging via Charging Tray DTray
For charging more than one battery pack an external charging unit DTray is required. With DTray it is
possible to charge 10 units at once. First you have to remove the battery pack from DDoc.
Removing the battery pack
No tools are necessary to remove the battery pack. If not already done, separate the DMic unit from the
docking unit DDoc as shown below.
Note: This charging solution offers you the opportunity to leave all units on the tables in your
conference room. Just collect all batteries after the conference day to re-charge them.
You also can just exchange discharged batteries (during conference) with charged one’s offering
the possibility of an “unlimited” wireless conference period.
To remove the rechargeable battery pack, pick up the DDoc and turn it upside down, press the
Connector for
power supply
Attention: Before the first use of the
batteries it should be charged at least for
24 hours.