DIGIMIC
DCen MkII
Operating Instructions
4
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
T +49224 4 8414-4
www.braehler-systems.com
05.0055 220223 V1.0 BRÄHLER Systems is constantly improving its products and therefore reserves the right to make technical changes without notice
Important information
Safety instructions
▪
Read this manual!
▪
Keep the manual in a safe place
▪
Observe the specified warnings
▪
Follow the instructions
▪
Do not use the device near water
▪
Clean the device only with a dry, clean cloth
▪
Do not block the ventilation slots
▪
Install the device only according to the instructions in this manual
▪
Do not operate near any heat sources such as radiators, heat registers, stoves, or other apparatus
that produce heat
▪
This device is supplied with an IEC power cord including molded-in power plug. This is for your
safety! Do not attempt to replace the supplied cord yourself if it does not fit your outlet. Instead,
consult a competent electrician. He will be able to replace the cable with one that matches the
mains sockets in your country. Or have obsolete outlets replaced with new ones.
▪
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
▪
Only use attachments and accessories that are suitable according to the manufacturer.
▪
Unplug the unit during lightning storms or when unused for long periods of time.
▪
Have all maintenance work performed by qualified personnel. Servicing is required when the
equipment has been damaged in any way, such as power-supply cord or plug is damaged, the
equipment has been dropped, exposed to moisture, or does not operate normally.
Safety information
Warning.
To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Do
not open the device! Potentially dangerous voltages are present inside. Refer all servicing to
qualified service personnel.
Attention!
Use only accessories recommended by the manufacturer as suitable to avoid fire, electric
shock or other hazards. Do not remove any parts of the housing to avoid the risk of electric
shock. There are no user-serviceable parts. Refer all servicing to qualified service personnel.
Warning. Power source
The central control unit is a Class 1 device. It may only be connected to properly grounded
outlets. This equipment must be operated only from outlets specified on the label affixed to
the bottom of the unit. If you are unsure of the type of power supply in your building,
consult your dealer or local power company.
