ProImage
Plus3000/XL3000 PosterPrinter
Helpful Tips
Page 9
Printing with Microsoft
Excel 95, 97 and 2000
1. Select
from the File menu. The Print dialog box appears.
2. Select
FujiFilm PP3000
or the
PP3000WIDE
and click
Properties
. The FujiFilm PP3000 or the
PP3000WIDE properties sheet appears.
3. Configure the Paper tab:
•
Roll Paper Size
: Select the roll width that matches the installed paper.
•
Print Paper Size
: Select the standard page size or create a custom page size.
•
Gaps Between Pages
: Check this option.
Note
: Standard pages are indicated by an asterisk (*) following the page size. For instructions on creating
custom page sizes, see the
FujiFilm PosterPrinter 3000/3000Wide Interface Kit User’s Guide.
Document Size
: Select US Letter.
•
Processor Speed
: Select Middle.
•
Orientation
: Select Portrait or Landscape.
4. Click
OK
. The Print dialog box reappears.
5. Click
Cancel
.
6. Select
Page Setup
from the File menu. The Page Setup dialog box appears.
7. Click the
Page
tab (if necessary) and select the correct orientation, paper size, and print quality. Match the
orientation and paper size selections you made in Step 3.
8. If necessary, click the
Margins
tab. To use the full printable area set the bottom margin at 0.6 and set all other
margins to zero.
9. Click
Print Preview
to make sure everything fits in the printable area.
10. Click
. The Print dialog box reappears.
11. Click
OK
to begin printing.
Tips
•
If you are creating multiple pages, make sure that all pages have the same document size when printing.
•
This application is not well suited for making banners.
