Brady ProImage Plus3000 PosterPrinter, Helpful Operation Tips

Page: 7 / 17

ProImage

Plus3000/XL3000 PosterPrinter

Helpful Tips Page 6
Printing with CorelDRAW
   
7.0
1. Select
Print from the File menu. The Print dialog box appears.
2. Select the FujiFilm PP3000 or the PP3000WIDE print driver and click Properties . The FujiFilm PP3000 or
the PP3000WIDE properties sheet appears.
3. Configure the Paper tab as follows:
•
Roll Paper Size : Select the roll width that matches the installed paper.
•
Print Paper Size : Select the standard page size or create a custom page size.
•
Gaps Between Pages : Check this option.
Note : Standard pages are indicated by an asterisk (*) following the page size. For instructions on creating
custom page sizes, see the
FujiFilm PosterPrinter 3000/3000Wide Interface Kit User’s Guide.
•
Document Size : Select US Letter.
•
Processor Speed : Select Middle.
•
Orientation : Select Portrait or Landscape.
4. Click OK . The Print dialog box reappears.
5. Click Options . The Print Options dialog box appears.
6. Select the Fit to page option. A check mark appears in the check box when you select the option.
7. Click OK to redisplay the Print dialog box.
8. Click OK to begin printing.
Tip
•
For non-standard page sizes, select the Set From Printer option in the Layout, Page Setup dialog box. You
may also need to toggle between Portrait and Landscape to get CorelDRAW

to update page sizes.