Brady Bradyprinter THT 300X-PLUS, Manual, Page: 55 / 180

Printer Operation
Load the Printer
Bradyprinter THT X-Plus II Series User Guide 27
To load the ribbon, complete these steps:
1. Align the segments of the ribbon supply spindle as shown in the following
illustration.
2. Place the roll of ribbon on the ribbon supply spindle, and push the core as far back
as it can go. The following illustration shows the printer components that are
mentioned in this procedure.
3. If the printhead is closed, open it using the printhead lever.
4. Thread the ribbon leader and attached ribbon under the ribbon guide roller, through
the print mechanism, and past the platen roller.
1
Top roller
2
Ribbon take-up spindle
3
Ribbon supply spindle
4
Ribbon guide roller
5
Ribbon leader attached to ribbon
6
Platen roller (not shown)
7
Printhead lever
(shown in the Open position)
Note • For the BP THT 360X-Plus II, thread the leader first through the
ribbon dancer roller assembly.
1 2
3
4
6
5
7