Brady Bradyprinter THT 300X-PLUS, Manual

Page: 102 / 180

74 Bradyprinter THT X-Plus II Series User Guide
Front Panel Controls
Password-Protected Parameters
Password-Protected Parameters
Certain parameters are password-protected by factory default, including the
communication parameters.
The first attempt to change a password-protected parameter (pressing one of the ovals)
requires you to enter a four-digit password at the
ENTER PASSWORD
display. The left
oval changes the selected digit position; the right oval increases the selected digit
value. After entering the password, press
NEXT/SAVE . The parameter you wish to
change is displayed. If the password was entered correctly, you can now change the
value.
The first time that you attempt to change a password-protected parameter, the printer
displays
ENTER PASSWORD
. Before you can change the parameter, you must enter the
four-digit password. After you have entered the password correctly, you do not have to
enter it again unless you leave Setup Mode by pressing
SETUP/EXIT
or by turning the
printer Off ( O ).
To Enter a Password for a Password-Protected Parameter,
complete these steps:
1. At the password prompt, use the left oval to change the selected digit position.
2. When you have selected the digit that you wish to change, use the right oval to
increase the selected digit value. Repeat these two steps for each digit of the
password.
3. After entering the password, press
NEXT/SAVE
.
The parameter you selected to change is displayed. If the password was entered
correctly, you can change the value.
Note • If the parameters are set incorrectly, the printer may function unpredictably.