Brady Bradyprinter THT 300X-PLUS, Manual

Page: 108 / 180

80 Bradyprinter THT X-Plus II Series User Guide
Front Panel Controls
Front Panel LCD
EARLY WARNING
Setting Early Warning
When this parameter is enabled, the printer provides warnings when labels or
ribbons are running low or when the printhead needs to be cleaned.
Note •
Labels per roll and ribbon length need to be updated when beginning
use of the Early Warning System. Also, the printer does not make any
adjustments when power is turned off and on.
•
Press the right or left oval to display other choices.
Default: Media disabled, ribbon disabled, maintenance disabled
Selections: Media disabled, media enabled, ribbon disabled, ribbon enabled,
maintenance disabled, maintenance enabled
To change the Early Warning settings,
1. When the LCD displays EARLY WARNING , press the right or left oval until the
desired setting is listed on the LCD. (If you are prompted for a password,
enter your password using the instructions in
Password-Protected Parameters
on page 74
.)
2. Press NEXT/SAVE to access the next early warning option.
3. Repeat this process to set the early warning for ribbon or maintenance
(printhead cleaning).
When the printer detects that less than 15% of the labels or ribbon remain,
WARNING MEDIA LOW
or
WARNING RIBBON LOW
appears on the LCD. If the
alert function has been enabled, an alert is also sent. When the printhead is
opened then closed after a media or ribbon warning has been received, the
LCD prompts with
MEDIA REPLACED?
or
RIBBON REPLACED?
. Press the
right oval to select
YES
to clear the warning and reset the label counter.
Note • When setting the early warning for maintenance, an additional setting
appears after the media setting that prompts the LCD to ask
HEAD CLEAN?
.
1. Press the right oval to select
YES.
2. Press SETUP/EXIT to exit setup mode.
3.
Press
NEXT/SAVE
to save changes.
LCD Description