Brady Bradyprinter THT 300X-PLUS, Manual, Page: 138 / 180

110 Bradyprinter THT X-Plus II Series User Guide
Routine Maintenance
Replace Fuse
2.
Remove the faulty fuse and install a new fuse in the in-circuit position as shown.
This illustration identifies the parts of the fuse holder.
3. Snap the fuse holder back into the AC power entry module.
4. Reconnect the power cord, and turn the printer On ( I ).
!
Important •
If you use the spare fuse, be sure to order a replacement fuse from an
authorized Brady distributor. The spare fuse should be the exact type and rating as the
original in-circuit fuse.
1
In-circuit fuse
2 Fuse holder
3
Spare fuse
Note • If the printer does not power on, an internal component failure may have
occurred, and the printer requires servicing by an authorized service technician.
1
2
3