Installation
S19-2010 Series
Bradley
•
215-1873 Rev. B: ECO 20-09-002
1/20/2020
5
Connect Supply Lines
3
Adjust Temperature with Water Running
CAUTION This valve is not factory preset. Upon installation, the temperature of this valve must be
checked and adjusted to ensure delivery of a safe water temperature.
4
Faucet Temperature Adjustment
HOT
Do not turn past the stops as this may
damage the unit.
Loosen cap screw.
Using the cover, adjust
outlet temperature.
C
H
A
Thread the hot and cold supplies to 1/2" NPT
female threads.
B
Install unions or union-function equivalent
fittings (hoses with swivel connectors) in the
inlet lines to facilitate valve removal.
C
SLOWLY pressurize the thermostatic mixing
valve and check for pipe leaks.
C
Push the cover down and tighten the cap
screw.
B
Using the cover, gently turn the cartridge to
obtain the desired water temperature.
A
Loosen the cap screw approximately 1/4"
(4–6 turns counterclockwise) and lift up the
cover. DO NOT REMOVE THE COVER.
WARNING Water in excess of 110°F (43°C) may
cause scalding. Verify the water
temperature does not exceed this
temperature.
COLD
