Bradley Bradstone WF2800 Series Installation Manual Download Page 22

Page: 22 / 24

8 of 10

1/29/2018

Bradley

• 215-1834-32 Rev. A: ECN 17-00-020

TouchTime

Activation Modules - Non-Sectional Circular Washfountains

WF2505, WF2508, WF2605, WF2608, WF2705, WF2708, WF2805 & WF2808

P.O. Box 309

•

Menomonee Falls, WI 53052-0309

•

1 800 BRADLEY

•

262 251 6000

•

bradleycorp.com

Electrical and Supply Connections

WARNING The TouchTime activation must be connected with a 12V DC plug in adapter. Connections

to 110 VAC can cause personal injury and will result in damage to the electronics.

Mechanical pushbutton shown, piezo switch similar.

TouchTime/Piezo Non-Sectional

Connection Box

(S83-412)

TouchTime Module

(S83-360)

Mechanical TouchTime

Pushbutton (S83-368)

Piezo Switch Button

(S83-369)

Plug-In Adapter

(261-147A)

Activation of the push button takes place only when it
is released, thereby preventing “hold open” activation.

Connect splitter connector
to TouchTime module.

Connect TouchTime module
to TouchTime connection
box using jump cord.

Jump Cord
(269-2682)

Connect valve connector to
TouchTime module.

Manual Non-Sectional valving. Use

wire ties to secure valving to mounting

bracket.

Summary of Contents for Bradstone WF2800 Series

























Search results

Summary of Contents for Bradstone WF2800 Series

Reviews:

Related manuals for Bradstone WF2800 Series

Brands by name

Popular brands

Bradley Bradstone WF2800 Series, Installation Manual

Search results

Summary of Contents for Bradstone WF2800 Series

Reviews:

Related manuals for Bradstone WF2800 Series

Brands by name

Popular brands