5 of 10
1/29/2018
Bradley
• 215-1834-32 Rev. A: ECN 17-00-020
TouchTime
®
Activation Modules - Non-Sectional Circular Washfountains
WF2505, WF2508, WF2605, WF2608, WF2705, WF2708, WF2805 & WF2808
P.O. Box 309
•
Menomonee Falls, WI 53052-0309
•
1 800 BRADLEY
•
262 251 6000
•
bradleycorp.com
Top
Cover
Soap
Dispenser
Spacer
Module
Cover
TouchTime Module
Assembly
Pushbutton (S83-340-DC)
Piezo Switch (S83-383-DC)
Tie Bar
Sprayhead (S05-054)
See 215-1834-21 for
supply connections.
Support Tube
36" Bowl (S57-006)
54" Bowl (S57-005)
Unit with "H" Drain and
TouchTime Module Shown, Also
Available with "B" Drain
Some optional equipment shown.
1b
Assemble TouchTime
®
– B and H Units (H Shown) (cont...)
Skip to step F for units without soap.
E
For units with soap option, install the spacer,
soap dispenser and cover in position on top
of air module. Slide tie bar over 1-1/2" vent
pipe 1/2" below top of soap dispenser lid and
secure with set screws. Slide the dispenser
cover over 1-1/2" vent pipe and secure with 2
screws included with tie bar.
F
Slide tie bar over 1-1/2" vent pipe 1/2" below
top of air module cover and secure with set
screws. Slide the dispenser cover 1-1/2" vent
pipe and secure with 2 screws included with
tie bar.
G
Connect vent pipe to vent through ceiling with
pipe union.
H
FOR B UNIT:
Install 1/2" nominal copper
tubing supply lines (pass them through holes
in cover down through support column) and
connect to stops using suitable fittings.
D
Insert the 1-1/2" vent pipe (supplied by
installer) through the TouchTime module,
sprayhead and support tube. Connect to
vented trap provided.
