3. Installation
2. Slide the other plastic downwards and press it into the lower plastic so that both are
fi
xed in each other.
2
1
Image 3-4
3.2.2
Step 2: Cable routing preparation (optional)
About cable routing preparation
In case you will be using the display with the stand/handle option mounted, all cables should be
fi
rst
routed through the stand/handle before connecting or mounting anything else. Depending on the mounting
position of the stand/handle, the cables should be routed through a different gap. Below is an overview of
the different mounting options and which cable gap to use in each situation.
When you’re also using the rubber cap to guarantee the IP protection degree then the cables must be
routed through this cap as well.
1
2
3
4
Image 3-5
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013
9
