7. Important information
Installation precautions
•
Place the equipment on a
fl
at, solid and stable surface that can support the weight of at least 3 equip-
ments. If you use an unstable cart or stand, the equipment may fall, causing serious injury to a child
or adult, and serious damage to the equipment.
•
Do not allow to climb or rest on the equipment.
•
Provide full attention to safety during installation, periodic maintenance and examination of this equip-
ment.
•
Suf
fi
cient expertise is required for installing this equipment, especially to determine the strength of the
wall for withstanding the display’s weight. Be sure to entrust the equipment installation and attachment
of this equipment to the wall to licensed contractors of Barco and pay adequate attention to safety
during the installation and usage.
•
Barco is not liable for any damage or injury caused by mishandling or improper installation.
•
The equipment should be installed near an easily accessible outlet.
•
Do not install or leave the monitor:
- In places subject to extreme temperatures, for example near a radiator, heating vent, or in direct
sunlight. Subjecting the LCD monitor to extreme temperatures, could cause deformations of the
casing or malfunctions.
- In places subject to mechanical vibration or shock.
- Near any equipment that generates a strong magnetic
fi
eld.
- In places subject to inordinate amounts of dust, dirt, or sand, for example near an open window or
an outdoor exit.
•
Provide adequate ventilation to the monitor, do not block the ventilation holes.
•
If setting up temporarily in an outdoor environment, be sure to take adequate precautions against
airborne dust and dirt. Otherwise irreparable malfunctions could occur.
•
When the monitor is assembled in the medical system, take care of the anchorage of all cables, to
avoid unwanted detachment.
•
Remove the protection
fi
lm from the panel only after completing the entire display installation proce-
dure.
•
The product is intended for indoor use
•
The monitor has been designed to be used in landscape position with 15 degrees of tilt forward or 15
degrees of tilt backward.
This apparatus conforms to:
•
93/42/EEC, Amended by 2007/47/EC (Medical device Class I)
•
EN 60601-1:2006 (3rd Ed.)
•
IEC 60601-1:1988 + A1:1991 + A2:1995 (2nd Ed.)
•
IEC 60601-1:2005 + Corr. 1: 2006 + Corr. 2: 2007 (3rd Ed.)
•
UL60601-1 1st Ed, 2006-04-26
•
ANSI/AAMI ES 60601-1: 2005
•
CAN/CSA-C22.2 No 601.1-M90, 2005
•
CAN/CSA-C22.2 No 60601.1:2008
•
IEC/EN 60601-1-2:2007 (Medical electrical equipment. Part 1-2: General requirements for basic
safety and essential performance – Collateral Standard: Electromagnetic compatibility – Require-
ments and tests)
•
FCC 47 CFR Part 15 Sub B FCC rules for radio frequency devices: Class B
National Scandinavian Deviations for CL. 1.7.2:
Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan"
Norway: "Apparatet må tilkoples jordet stikkontakt"
Sweden: "Apparaten skall anslutas till jordat uttag"
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013
33
