3. Installation
3. INSTALLATION
About the installation of the display
The next section describes how to install your MSMD-1119 or MSMD-1119-TS display. A
fi
rst subsection
shows you how to quickly install your display for use on a desk, without IP protection requirements. The
second subsection explains a more detailed installation procedure with IP protection option, VESA arm
handle option and detailed cable routing description.
W
ARNING
:
Read all the important safety information before installing and operating
your MSMD-1119 or MSMD-1119-TS display. Please refer to the dedicated chapter in this
user guide.
3.1
Quick installation procedure
W
ARNING
:
The protection against ingress of water IP33 will be void when installing the
display according to this quick installation procedure. If this would be an issue, please
follow the detailed installation procedure which is described in the next section.
To quickly install the display
1. Fix the 4 rubber pads to the bottom of the stand.
2. Mount the display
fi
rmly to the stand/handle using 4 M4 x 16 mm screws.
3. Route all cables through the oval cable gap in the stand.
4. Connect one or more video sources, then connect the power to the display.
1
2
Image 3-1
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013
7
