39
Fig. 65
Fig. 63
Make sure
that all connectors/blanking plugs are fully inserted
into the ECU slide lock housing (Fig. 63).
Push in lock slider (Fig. 64/
1
) to secure in place all plugs/
connectors.
Note: Do not use extreme force to push in slider.
Make sure slider is in the lock position (Fig. 64/
2
).
WARNING
If diffi culty is encountered in locking the slider, check plug or
connector for correct fi tment (Fig. 65).
If the white O-ring is visible, the plug is not installed correctly
and slider will not lock into position (Fig. 65).
3.2 Electrical wiring
3.2.12 Connectors /
Blanking plugs
Fig. 64
1
2
Summary of Contents for ECO Tronic EBS
