23
The following installation parameters are required for correct
TRS operation.
Roll angle : ± 3° (1:20) (Fig. 26).
Yaw angle : ± 5° (Fig. 27).
Pitch angle:
The Modulator must be mounted vertically (Fig. 28).
The Modulator must be mounted within distances x and y
from the centre of the axle (s) (including possible lift axles).
Vehicle
x
y
Semi trailer
1.5 m
1.5 m
Centre axle drawbar trailer 1.5 m
1.5 m
Drawbar trailer
3.0 m
1.5 m
The Modulator has to be mounted inside the main left hand (LH)
and right hand (RH) chassis members of the vehicle (Fig. 29).
For any other applications please refer to
BPW Bergische Achsen
K
G.
The unit should not be in direct spray or splash water area
and should be protected against high pressure cleaning.
Fig. 26
Fig. 28
x
y
Within
LH and RH
chassis
members
Single or tri-axle
5º
5º
5º
5º
Top view
Fig. 27
3º
3º
3º
3º
Rear End view
x
y
Within
LH and RH
chassis
members
Fig. 29
Tandem axle
3.1.2 Position with Trailer Roll
Stability (TRS) function
3.1 Mounting of the Modulator
Summary of Contents for ECO Tronic EBS
