BOXLIGHT ProjectoWrite6, User Manual

Page: 80 / 98

78
Network Control Software Application
ITEM SETTING DESCRIPTION
Basic
Projector Name Show projector name on the current projector.
Power Power On or Power Off the projector via network.
Input Source Select input source.
Picture
Brightness Adjust the image brightness level.
Contrast Adjust the image contrast level.
Sharpness Adjust the image sharpness.
Color Adjust the strength of whole color.
This function can only be used under Video signal, S-Video signal, or component
video signal input.
Tint Adjust the image tint.
This function can be used under Video signal, S-Video signal, or component video
signal.
Display Mode Adjust Natural/Cinema/Daylight/Green Board/White Board/Black/User Mode.
Audio
Volume Adjust the volume.
Mute Mute the volume OFF / ON.
Setting
Keystone Manually correct vertical keystone distortion in image.
Auto Sync Set all of the above setting automatically. (This function can only be used under PC
mode)
Auto Search Search signal source manually or automatically.
Advanced
Blank Blank the current image on the screen
Blank Power Off No / 15 / 30 / 60 (minutes)
Freeze Freeze the current image on the screen.
Resize 4:3,16:9, 1:1, 16:10
Reset All Reset all menu function to their factory default values.
Presentation
Projection Select Front/Ceiling/Rear/Celing and Rear
Lamp Mode Switch lamp mode between Powerful or Normal mode.