73
MENU
PIN Key In Operation
When the projector is turned on and the
PIN LOCK PROTECTION is set to [ON],
the image will show as on the right side.
1. Press the MENU button on the projector
or remote control. Enter PIN code by
keypad or remote control.
2. How to enter a PIN code?
You can use control panel or remote
control.
CONTROL PANEL
REMOTE CONTROL
The control panel and remote control buttons to enter a sequence
of PIN code is like the photo below.
(1) Press ◄ button: Select the [ 1 ]
(2) Press ▲ button: Select the [ 2 ]
(3) Press ► button: Select the [ 3 ]
(4) Press ▼ button: Select the [ Enter ] move to next row.(4~6,7~9,
~OK)
(5) Press
(backspace) item:
In case you enter a wrong digit, select
to delete the wrong digit you entered.
(6) Press
item:
Once all four digits of the PIN are entered, select
to confirm.
►
NOTE
If the PIN is incorrect, an “Enter new code” message will be shown. Please try again. If the PIN
code input is incorrect for three times, a warning message will show up and the projector will shut
itself down in 30 seconds.
If you have no idea about the PIN, please contact your dealer for help.
Summary of Contents for ProjectoWrite6
Page 36: ...34 EZ Suite EZ Display Fwtction About EZ WiFi LAN...
Page 43: ...41 EZ Suite EZ Display Function 4 View local photo gallery and do a sketch...
Page 53: ...51 EZ Suite Setting Configuration Press to connect to as a client...
Page 98: ...Appendix Appearance 116 4 146 5 359 5 317 6 126 9 166 1 140 0 215 0 172 0 197 0 96...
