88
Maintenance of Projector
WARNING
The projector uses a high-pressure mercury lamp.
The explosion of lamp with a loud bang or burn out could possibly cause injury or a fire.
When the bulb burst, it is possible for shards of glass to fly into the lamp housing; and
for gas containing mercury to escape from the projector‟s vent holes.
If the lamp has broken, do not check the inside of the projector. Ventilate the room
immediately.
Do not touch or bring your face close to the broken pieces since it might get into your
eyes or mouth. In case of injury, seek medical advice immediately.
Disposal of a Lamp
Dispose of a lamp in accordance with the local recycling laws.
Do not put it to your trash.
Recycling Lamp‟s laws of the USA, go to
www.lamprecycle.org
.
Recycling Product‟s laws of USA, go to
www.eiae.org
.
Recycling Product‟s laws of Canada, go to
www.epsc.ca
.
For more information about recycling laws, please contact local government agency or
dealer.
CAUTION HOT
Before replacing the Lamp part, pay attention to the following items:
1. The Lamp is optional part. Contact the dealer for replacement lamp.
2. The lamp becomes very hot when in use. Turn the power off and disconnect the power
cord.
3. Wait one hour before replacing the lamp.
4. Do not use old lamp part.
Summary of Contents for ProjectoWrite6
Page 36: ...34 EZ Suite EZ Display Fwtction About EZ WiFi LAN...
Page 43: ...41 EZ Suite EZ Display Function 4 View local photo gallery and do a sketch...
Page 53: ...51 EZ Suite Setting Configuration Press to connect to as a client...
Page 98: ...Appendix Appearance 116 4 146 5 359 5 317 6 126 9 166 1 140 0 215 0 172 0 197 0 96...
