BOXLIGHT ProjectoWrite6, User Manual

Page: 51 / 98

49
(=6XLWH6HWWLQJ
Configuration)
SSID (Service Set Identification): The same name of SSID must be assigned to wireless
devices in your network. Considering your wireless
network security, the default SSID is set to be “rtwap”.
Security: You can configure the security settings of your wireless network.
There are three wireless security modes supported by the Router: Open, WPA2
and WPA.
Open – means there are no security settings for this wireless network.
The default setting is automatically based on the wireless station's capability
and request.
WPA (default) and WPA2 – It‟s the WPA/WPA2 authentication type.
PSK (Pass-Key): You can enter a key-code.
Channel: This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference
problems with another nearby access point.
Auto: The default setting is automatic, which can adjust the channel width for your
clients automatically.
V: press the ENTER button to enable AP mode, and then press the ESC button on the
remote control to quit AP mode setting page.
X: abort the setting, or you can press the ESC button on the remote control to quit setting.