32
There are also a few ways to put a Microphone into registration mode:
1 . For a mic that is powered on, but not registered AND in range of an existing Base Station, press the Mute button for
2 seconds until you hear the double-beep then let go .
2 . If the mic IS registered with a nearby Base Station and you want to move it, there are two options:
a . Delete the mic from the current Base Station (see how to do this below), then register with the new Base Station .
b . Force the mic into registration mode by removing the battery cover and inserting the pin that came with the mic (or a
toothpick/paperclip will work) into the registration button hole in the bottom left of the battery cavity (green arrows) .
To Delete a Microphone from a Base Station:
1 . Place all mics that are active in the room in the chargers (or connect to USB)
2 . Delete the mic on the Mic Info page on the CM900 Configuration page .