14
Outgoing Audio (talk-back):
• Gain setting for the audio sent back to the front office from the in-room intercom microphone, i .e . the wall (CB75) or ceiling
(CB85) unit . The gain setting for the pendant microphone when used as an additional intercom microphone is set through
Ch1 line input gain . The corresponding Routing checkbox, e .g ., “Include sound from Ch1 Line-in”, must be selected to
enable each gain adjustment .
Routing for Outgoing Streams:
Select which audio stream is sent back to the front office . If both are selected, the combined streams will be sent .
•
Include sound from Intercom
- Streams audio from the CB75 or CB85
•
Include sound from Ch1 Line-in
- Streams audio that is coming in through Channel 1 (The ELEVATE Base Station)
External Page Override:
For use with 25V, 70V and 100V analog paging systems . The CM900 can mute all audio in the room when an announcement is
made over the facility’s paging system . Analog page override requires a connection to the facility’s PA system . For information
about connecting the page override function to the PA system, see Page Override Installer Guide .
•
Sensitivity
- Determines how easily the page override will trigger based on the detected voltage of the paging system . If
the CM900 does not detect a page, increase sensitivity . If the CM900 triggers when there is no page, decrease sensitivity .
•
PGO Release
- The amount of time it takes for the local (in room) audio to return to normal volume after the audio from the
announcement ends .