Bowflex 1090 DUMBBELLS, Service Manual

Page: 9 / 21

5
BDS552 Chrome Stand and
BDS1642 2-in-1
STAND
- Assembly Troubleshooting
Problem:
The Towel Bar cannot be attached to both Dumbell Platforms.
See Figures 1A and 1B .
Solution:
The Left and Right Dumbbell Platforms are installed on the
wrong Legs, and need to be switched. Please refer to the Parts
List item numbers and Exploded View in this service manual.
Detailed assembly instructions are provided in the Assembly
Manual.
Tools:
• 7/32” Hex Key
• 9/16” Socket
• 9/16” Wrench or Adjustable Wrench
Steps:
1-1 Unscrew the Towel Bar (#9) from the Dumbbell Platform
(#7 / #8). Set the hardware safely aside.
1-2 Unscrew the Dumbbell Platforms (#7 and #8) from the
stand Legs (#1). Set the hardware for each Platform
safely aside.
1- Attach the Right Platform (#7) to the right Leg (#1) and the
Left Platform (#8) to the left Leg (#1) using the hardware
from Step 1-2.
Note:
When you reinstall the Dumbbell Platforms on the stand,
check the following:
• The Dumbell Platforms should be installed so that the
screw holes for attaching the Towel Bar are closer to
the upper end of each platform. See
Figure 2
.
Figure 1B – Close-up
Figure 1A – Incorrect Assembly
TROUBLESHOOTING GUIDE