Bovie AARON 2250, Service Manual, Page: 48 / 106

4-10 Aaron Medical
A/D1_REF_V_DAC_DATA This is a communication line used by the system logic to control the sensing A/D’s.
A/D1_REF_V_DAC_SCLK This is a communication line used by the system logic to control the sensing A/D’s.
A/D1_REF_V_DAC_SYNC This is a communication line used by the system logic to control the sensing A/D’s.
A/D2_REF_V_DAC_DATA This is a communication line used by the system logic to control the sensing A/D’s.
A/D2_REF_V_DAC_SCLK This is a communication line used by the system logic to control the sensing A/D’s.
A/D2_REF_V_DAC_SYNC This is a communication line used by the system logic to control the sensing A/D’s.
BURN_TST This is an input signal to the control logic for toggling the unit into automatic burn-in routine.
AUX1_JMP Reserved
TEST_JMP Reserved
I_TRANS_1
This is an input signal from the current sensor to the control logic. Used to monitor the
output current of the unit.
I_TRANS_2
This is an input signal from the current sensor to the control logic. Used to monitor the
output current of the unit.
I_TRANS_3
This is an input signal from the current sensor to the control logic. Used to monitor the
output current of the unit.
V_TRANS_1
This is an input signal from the voltage sensor to the control logic. Used to monitor the
output voltage of the unit.
V_TRANS_2
This is an input signal from the voltage sensor to the control logic. Used to monitor the
output voltage of the unit.
V_TRANS_3
This is an input signal from the voltage sensor to the control logic. Used to monitor the
output voltage of the unit.
L_TRANS_1
This is an input signal from the impedance sensor to the control logic. Used to monitor the
output voltage of the unit.
L_TRANS_2
This is an input signal from the impedance sensor to the control logic. Used to monitor the
output voltage of the unit.
L_TRANS_3
This is an input signal from the impedance sensor to the control logic. Used to monitor the
output voltage of the unit.
TEMP_1
This is an input signal from the temperature circuit to the control logic. Used to monitor
internal temperature of the unit.
TEMP_2
This is an input signal from the temperature circuit to the control logic. Used to monitor
internal temperature of the unit.
TEMP_3
This is an input signal from the temperature circuit to the control logic. Used to monitor
internal temperature of the unit.
VB_TRANS_1
This is an input signal from the backup voltage sensor to the control logic. Used to monitor
the output voltage of the unit.
VB_TRANS_2
This is an input signal from the backup voltage sensor to the control logic. Used to monitor
the output voltage of the unit.
VB_TRANS_3
This is an input signal from the backup voltage sensor to the control logic. Used to monitor
the output voltage of the unit.
IB_TRANS_1
This is an input signal from the backup current sensor to the control logic. Used to monitor
the output current of the unit.
IB_TRANS_2
This is an input signal from the backup current sensor to the control logic Used to monitor
the output current of the unit.
IB_TRANS_3
This is an input signal from the backup current sensor to the control logic. Used to monitor
the output current of the unit.