Bovie AARON 2250, Service Manual, Page: 19 / 106

Cut and Blend Controls
Figure 2 – 2 Controls for the Cut and Blend modes
2-5 Ser vice Guide • Aaron 2250
NOTICE:
When selecting the Blend mode, the unit defaults to a setting of minimum blend (only the first bar
is illuminated).
Cut Power Control Buttons
Increases or decreases the Cut or
Blend power output in increments
of 1 to 10 watts.
Cut and Blend
Mode Selector
Toggles between
Cut and Blend
modes.
Blend Amount Indicator
Indicates the amount of
blend added in the Blend
mode. More bars illuminated
indicates more blend, divided
into 10 steps.
Blend Amount Control Buttons
Increases or decreases the amount
of blend (Level 1-10) added in the
Blend mode.
Cut Mode Indicator
Indicates when the
Cut mode is selected.
Blend Mode Indicator
Indicates when the Blend
mode is selected.
Cut Power Display (watts)
Indicates the power set for
the Cut / Blend mode.
Cut Activation Indicator
Illuminates when Cut or
Blend mode is activated.