36459-6-0217
Page 40
Turn On the Fireplace
With the system OFF, press the ON/OFF Button on the
Transmitter. The Transmitter display will show some other active
Icons on the screen. At the same time the Receiver will activate
the fireplace. A single beep from the Receiver will confirm
reception of the command.
Turn OFF the Fireplace
With the system ON, press the ON/OFF Button on the
Transmitter. The Transmitter LCD display will only show the room
temperature.
See Figure 76.
At the same time the Receiver will
turn off the fireplace. A single beep from the Receiver confirms
reception of the command.
Remote Control Display - Figure 76
Remote Flame Control
The Proflame has six flame levels. With the system on, and the
flame level at the maximum in the fireplace, pressing the Down
Arrow Button once will reduce the flame height by one step until
the flame is turned off.
The Up Arrow Button will increase the flame height each time it
is pressed. If the Up Arrow Button is pressed while the system is
on but the flame is off, the flame will come on in the high position.
See Figures 77 through 80
. A single beep will confirm reception
of the command.
OFF
Flame Off - Figure 77
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
OFF
Flame Level 1 - Figure 78
OFF
Flame Level 5 - Figure 79
OFF
Flame Level Maximum - Figure 80
