ACCESSORY INSTALLATION
INSTRUCTIONS
STEREO
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/11/2010
Rev: C
PROCEDURE NO.
AI-MS-012
8.1.4. Insert the switch, from under the console, into the hole drilled in step 8.1.2.
8.1.5. Replace the brass nut.
8.1.6. Using the pliers secure the switch to
the console.
8.1.7. Place the knobs onto the switches.
8.1.8. Apply stereo label to console
8.2. Install the stereo unit.
8.2.1. Using the measuring tape, measure 3” in from the port
edge of the console and using the pencil, strike a vertical
mark.
8.2.2. Using the measuring tape, measure 1 3/4” DOWN from
the top edge of the console and using the pencil, strike a
horizontal mark which intersects the mark made in the
previous step.
8.2.3. Using the drill with the 3/4” hole saw, cut through the
console at the center of the marks made in steps
8.2.1. & 8.2.2.
Page 3 of 11
