ACCESSORY INSTALLATION
INSTRUCTIONS
STEREO
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/11/2010
Rev: C
PROCEDURE NO.
AI-MS-012
8.6.
Mount the stereo control box under the bench.
8.6.1. Place the control box in the
space under the bench on the
starboard side of the boat 2”
aft of the forward flange of
the seat.
NOTE:
Assure that the wire
bundle faces the
starboard side of the
bench.
8.6.2. While holding the box to the underside of the
bench, use the pencil to mark the bench
through the screw holes in each side of the
control box.
8.6.3. Using the drill with 1/8” drill bit, drill the bench at the
marks made in the previous step.
NOTE:
Drill only deeply enough to penetrate the
fiberglass layer. DO NOT drill into or through
the core material.
8.6.4. Using #8 x 5/8” truss head screws, secure the control
box to the underside of the bench.
Page 8 of 11
