g038119
Figure 7
1.
Self-tapping bolts
3.
Plow controller connector
2.
Dash bracket
8.
Mount the plow controller connector to the dash
bracket, and secure the bracket to the left of the
steering wheel using 2 self-tapping bolts (
9.
Plug the plow controller into the plow controller
connector.
10.
Locate a keyed 12 V+ ignition source on
the vehicle wire harness and identify the
corresponding connector in your loose parts.
11.
Slide the appropriate connector onto the end of
the black/red wire and crimp the connector to
secure it.
12.
Connect the black/red wire to a keyed 12 V+
ignition source (
).
Note:
Connecting the wire to a source that is
not keyed can cause the battery to drain.
g038427
Figure 8
1.
Keyed 12 V+ ignition
source
3.
Black/Red wire
2.
Connector
13.
Connect the black power/ground cable to the
negative (-) battery terminal (
g038428
Figure 9
1.
Black power/ground cable
2.
Red power/ground cable
14.
Connect the red power/ground cable to the
positive (+) battery terminal (
15.
Secure all wiring in a position that avoids hot or
moving parts using cable ties.
Mounting the Snowplow
Refer to
Mounting the Snowplow (page 13)
to mount
the plow.
9
