Boss Snowplow MSC13625, Owner'S Manual

Page: 14 / 28

Removing the Snowplow
Note:
The vehicle must be running before starting
this procedure. Set the parking brake. If your vehicle
does not have a parking brake, chock the wheels.
1. Activate the F
LOAT
feature on the plow controller.
g318517
Figure 16
1. Coupler handle
2. While putting upward pressure on the coupler
handle, turn the levers on the couplers to the
U
NLOCK
position ( Figure 17 ).
g038430
Figure 17
1. L
OCK
position 2. U
NLOCK
position
3. Using the coupler handle, lower the coupler
tower completely (
Figure 18 ).
g318518
Figure 18
1. Coupler tower
3. Lower pin
2. Wire harness 4. Pin receiver
4. Disconnect the plow wire harness from
the vehicle wire harness and secure the
electrical-plug dust-covers (
Figure 18 ).
5. Release the parking brake (if equipped) and
slowly back the vehicle away from the snowplow.
14