Boss Snowplow MSC13625 Owner'S Manual Download Page 2 | Manualshive

Page: 2 / 28

background image

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.

BOSS Products limited consumer warranty and BOSS
Products commercial warranty policies are located
at

www.BOSSPlow.com

.

Patent

www.ttcopats.com

.

Introduction

Note:

This manual is used for the assembly of all

BOSS ATV and UTV V-blade plows. Illustrations may
vary.

Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.

You may contact BOSS directly at

www.BOSSPlow.com

for product and accessory

information, help finding a dealer, or to register your
product.

Whenever you need service, genuine BOSS parts, or
additional information, contact an Authorized BOSS
Dealer or BOSS Technical Service (1-800-286-4155)
and have the model and serial numbers of your
product ready.

identifies the location of the

model and serial numbers on the product. Write the
numbers in the space provided.

g319521

Figure 1

1.

Serial number decal

Date
Purchased

Model No.

Serial No.

Blade Crate
Serial No.

Contents

Safety ....................................................................... 3

Preparation......................................................... 3
Operation............................................................ 3
Safety and Instructional Decals .......................... 4

Setup ........................................................................ 6

Installing the Coupler Assembly.......................... 6
Installing the Blade Guides ................................. 7
Mounting the Plow Controller .............................. 7
Installing the Wire Harness ................................. 8
Mounting the Snowplow...................................... 9

Product Overview ................................................... 10

Controls ........................................................... 10
Specifications .................................................. 12
Attachments/Accessories ................................. 12

Operation ................................................................ 13

Mounting the Snowplow.................................... 13
Removing the Snowplow .................................. 14
Adjusting the Blades ......................................... 15
Checking the Hydraulic Fluid Level ................... 16
Adding Hydraulic Fluid...................................... 17
Operating Tips ................................................. 17

Maintenance ........................................................... 18

Recommended Maintenance Schedule(s) ........... 18

Checking the Hydraulic Lines and

Hoses............................................................ 19

Storage ................................................................... 19

Storing the Plow ............................................... 19
Removing the Plow from Storage...................... 19

Troubleshooting ...................................................... 20
Schematics ............................................................. 24

© 2020—BOSS Products
P.O. Box 787
Iron Mountain, MI 49801

2

Contact us at www.bossplow.com.

Printed in the USA

All Rights Reserved

«
1
2
3
4
...
»

Summary of Contents for MSC13625





























Reviews:

No comments

Related manuals for MSC13625

Brand: Poulan Pro Pages: 20

Brand: Full Boar Pages: 12

Brand: Tanaka Pages: 10

Brand: Powersmart Pages: 25

Brand: Partner Pages: 64

Brand: HAKO Pages: 64

Brand: Cub Cadet Pages: 28

Brand: Kongskilde Pages: 60

Brand: Cub Cadet Pages: 36

Brand: Bosch Pages: 40

Brand: Bosch Pages: 145

GBL 620 Professional

Brand: Bosch Pages: 37

Brand: Bosch Pages: 79

Brand: Bosch Pages: 24

Brand: Bosch Pages: 43

Brand: Hitachi Koki Pages: 80

Brand: Cub Cadet Pages: 48

Brand: Yamaha Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands