44
April 12, 2001
PDF259774_00
General and Internet Setup Options
Setting general setup options
To open the General setup window (Figure 38) and change the configuration, click the
Setup
button and click the General tab. After selecting the options you want,
• Click the
OK
button to save your settings and close the setup window, or
• Click the
Cancel
button to close the setup window without saving any changes, or
• Click the
Help
button to open the on-line help information window.
Figure 38
General setup options
(default settings)
If you want your Wave/PC system to automatically play music when you turn on your com-
puter, place a check next to “Launch Wave/PC application when Windows starts.”
Normally, the Wave/PC clock is synchronized to your computer’s clock. If you do not want
these clocks synchronized, remove the check next to “Synchronize Wave/PC clock with com-
puter’s clock.” In this case, you will need to set the Wave/PC clock manually on the control
panel of the Wave/PC unit. See “Setting the clock time” on page 49.
Tooltips are small pop-up windows that appear when you hover the cursor over a control.
They contain a short description of the control. Normally, tooltips are displayed unless you
deselect “Display tooltips for controls” and/or “Display tooltips for Station tables and Music
Finder windows.”
When checked, the calibrated volume settings are restored whenever the Wave/PC applica-
tion is launched. Volume settings were calibrated when you installed this software.