Product Features
Bose® ControlCenter zone controllers provide three options for remote volume control and input
source selection:
Controller
Function
Compatible Products
CC-1
Volume control only
FreeSpace® IZA 190-HZ
1
, IZA 250-LZ
1
, IZA 2120-LZ/HZ
FreeSpace ZA 2120-LZ/A - HZ/A
FreeSpace DXA 2120
PowerShare PS602, PS404A, PS604A
Any ControlSpace® processor
CC-2
Volume control with
A/B source selection
switch
FreeSpace IZA 190-HZ, IZA 250-LZ, IZA 2120-LZ/HZ
FreeSpace DXA 2120
Any ControlSpace processor
CC-3
Volume control with
A/B/C/D source
selection switch
Any ControlSpace processor
Each zone controller is available in white and black, and in North America, Japan, and EU
configurations. The North America zone controllers are sized for Decora® wall mounting, and
include two 1/2 inch #6-32 screws. The Japan zone controllers fit Wide 21 wall plates with a
face height of 1 mm above the thick wall plate cover; the controllers have approximately 3 mm
face height when used with other types of wall plate covers. Two 8 mm M4 screws are included.
Wall plate covers are not included with North America and Japan zone controllers. The EU zone
controllers come as a finished wall plate of size 86 mm x 86 mm, with 60 to 60.3 mm screw
spacing suitable for either vertical or horizontal mounting, and include two 18 mm M4 screws. All
models include a sheet of pre-printed color-matched labels.
Connecting a Single Zone Controller
Connect a single zone controller to a FreeSpace or PowerShare amplifier using a CAT 5 cable
with maximum length of 609 meters (2000 feet). Connect to a ControlSpace ESP using a CAT
5 cable with a maximum length of 152 meters (500 feet) for a shielded cable or 30 meters (100
feet) for an unshielded cable.
The cable must be terminated on one end with an RJ-45 connection using TIA/EIA 568B pinout,
and on the other end with an RJ-45 connector for PowerShare amplifiers, or the Euroblock
connector appropriate for the FreeSpace amplifier or ControlSpace processor (2-pin, 4-pin, or
6-pin).
1
Operates with a fixed input (B). Amp front panel A/B switch is inactive.
Introduction
pro.Bose.com
8 English
