en
Programme settings
24
--------
Finished in
‚
-
ƒ…
Before starting the programme
, you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
1.
Select a programme.
The programme duration will be displayed for the selected
programme, e.g.
‚
:
…†
(hours:minutes).
2.
Press
Finished in
repeatedly until the required number of
hours is displayed.
Note:
Use the
Finished in
+
button to increase the setting val-
ues, and the
Finished in
–
button to reduce them.
3.
Press
Start/Pause
A
.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g.
‰
) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note:
The programme duration is included in the "Ready in" time.
E.g.
\
‹
:
…‹
The drying time for
timed programmes
can be extended to up
to 3 hours 30 minutes in 10-minute increments.
