Bosch WORCESTER Sense II, Installation Instructions Manual

Page: 55 / 64

55
Commissioning report
Sense II – 6 720 818 367 (2015/10)
> Heating circuit 1 – 4
Heating circuit
Menu item Adjustment 1 2 3 4
Heating circuit 1
installed No
   
At the boiler

– – –
At the module
   
Ctrl type h. circ. 1 Outdoor-temp.-compensated
   
Outside temp. with low end
   
Room-temp.-compensated
   
Room temperature output
   
Constant
   
Prog. unit heat. circ. 1 Sense II ( no remote control installed)
   
Sense I (remote control installed)
   
Use minimum value Yes
   
No
   
Heating system heat
circ. 1 Radiator
   
Convector heater
   
Underfloor
   
Set point constant Set temperature
Max. flow temperature Set temperature
Set heating curve

Tab. 35
Setback type Reduced mode
   
Outside temperature threshold
   
Room temperature threshold
   
Reduced mode below Set temperature
Heat constantly below Set temperature
Off
   
Frost protect Outdoor temp.
   
Room temperature
   
Room and outdoor temp.
   
Off
   
Frost prot. limit temp. Set temperature
Mixer Yes
   
No
   
Mixer runtime Set time (in seconds)
....... s ........ s ........ s ........ s
Mixer increase Set temperature (in Kelvin)
....... K ....... K ....... K ....... K
Table 34 Settings at commissioning in the Heating circuit 1 – 4