INSTALLATION
6 720 644 842b (2010/12)
20
7
INSTALLATION
7.1
STANDARD PLUME MANAGEMENT INSTALLATION
FITTING THE STANDARD PLUME MANAGEMENT
SYSTEM:
Refer to figure 36 for terminal bend installation.
1. Remove and retain the screws and discard the
terminal end.
2. Fit the new terminal bend to the terminal outlet and
secure with the screws removed previously.
3. Mark the position for the wall clamp so that it
coincides with the extension tube just below the top
fitting (Refer to figure 37 point 2).
Drill a hole to suit the wall plug and fit the wall plug.
4. Screw the clamp into the wall plug to the distance
shown in figure 36.
Refer to figure 37 plume management installation.
1. Push the extension tube fully into the terminal bend,
then withdraw the tube by approximately 10mm to
allow for expansion.
2. Secure the extension to the wall with the clamp and
screws provided.
3. Push the outlet assembly fully into the extension tube.
4. Rotate the outlet assembly to the required direction.
5. Secure the outlet to the extension with the self-
tapping screw provided.
Fig. 36 Terminal bend installation
Fig. 37 Plume management installation
To ease assembly of the flue components,
lightly grease the seals with the solvent-free
grease supplied.
Check all the seals are properly seated in
the grooves provided and are in good
condition.
All flue joints must be sealed to prevent
leakage of condensate and flue products.
NOTE:
PLUME MANAGEMENT
B
All plume management sections must rise
away from the terminal by a minimum of
173mm per metre (10°) to allow the
condensate to drain back to the boiler.
NOTE:
DO NOT ROTATE THE COMPLETE
FLUE TERMINAL ASSEMBLY.
B
The flue terminal outlet has built-in stops
to limit rotation for horizontal fluing to
allow condensate to run back to the
boiler for safe disposal.
Do not attempt to force beyond the limit
stops.
1.
6720644842-22.1Wo
2.
3.
4.
±80°
65 mm
4.
6720644842-23.1Wo
±45°
10 mm
1.
1.
2.
2.
3.
4.
5.
Summary of Contents for WORCESTER Condensfit II GREENSTAR 60/100 HORIZONTAL FLUE
Page 26: ...6 720 644 842b 2010 12 26 NOTES ...