VIP XD
| Installation and User Guide
EN
| 67
Bosch Security Systems | 2005-05 | V1.0
Operation with a terminal program
Operation with a terminal program
7
As well as using Microsoft Internet Explorer, you can also control the
establishment of a connection from the VIP XD using a terminal program, for
example the HyperTerminal program that is part of Windows.
Connecting with a terminal program
Various requirements must be met in order to operate using a terminal program
(see page 19).
– Start the terminal program and enter the command
1
in the main menu to
switch to the
IP
menu.
– Enter the command
4
in the
IP
menu to change the remote IP address, then
enter the IP address of the device to connect to.
– Use the command
0
to return to the main menu.
– Enter the command
4
to switch to the
Rcp+
menu.
– Enter the command
5
in the
Rcp+
menu to activate the automatic connection.
Closing the connection with a terminal program
– Start the terminal program (see page 19); enter the command
4
in the main
menu to switch to the
Rcp+
menu.
– Enter the command
5
in the
Rcp+
menu to deactivate the automatic
connection.
Additional parameters
Using the terminal program, you can check other basic parameters and modify
them where necessary. Use the on-screen commands displayed in the various
submenus to do this.
