VIP XD
| Installation and User Guide
EN
| 65
Bosch Security Systems | 2005-05 | V1.0
Operation using a Web Browser
Connections between the transmitter and receiver
When the
CONNECTIONS
page is called up, the VIP XD automatically scans
the network for available transmitters. As soon as a transmitter is found in the
network, the VIP XD displays a JPEG snapshot from that transmitter. All
transmitters found are listed in the
Video sources
list field.
Note
The transmitter and receiver must be located in the same subnet to
establish a hardware connection (see pages 39 and 56).
Establishing the connection
Note
If the connection is not established, the maximum number of possible
connections may already have been reached. The maximum number of
connections depends on the device and network configuration.
– Choose the desired transmitter from the
Video sources
list field. A JPEG
snapshot from the selected video source will appear in the
Preview
area.
– Enable the
Include data
checkbox if you also want to transmit transparent
data. Ensure that the transmitter and receiver are correctly configured for
data transmission.
Note
The checkbox must be enabled before establishing the connection for data
transmission to be activated.
– Click in the checkbox again to deactivate the data connection.
– Click
Connect MPEG-4
to begin displaying the video images on the
connected monitor. In the
Monitor
area, you will see a snapshot of the
connected video source.
– If the transmitter is a multi-channel unit, for example a VideoJet 8008, you
can set the
Video input
for playback.
– Change from
Single view
to
Quad view
by activating the respective radio
button.
– If you want to set up more than one connection simultaneously choose a
different decoder stream for each connection in
Decoder
.
