Installation and User Guide |
VIP XD
EN
| 72
Maintenance and upgrades
Bosch Security Systems | 2005-05 | V1.0
– If necessary, back up the current configuration using the
Download
button
on the
Firmware and configuration upload
configuration page (see
page 58).
– Using a pointed object, press the Factory reset button located below the USB
interface until the operating status LED flashes red (see page 13). All settings
will revert to their defaults.
– Change the IP address of the unit if necessary.
– Configure the unit to meet your requirements.
Repairs
Warning!
Never open the casing of the VIP XD. The unit does not contain any user
serviceable parts.
Ensure that all maintenance or repair work is performed only by qualified
personnel (electrical engineering or network technology specialists). In case of
doubt, contact your dealer's technical service center.
Transfer and disposal
The VIP XD should only be passed on together with this installation and user
guide.
The unit and its power supply contain environmentally hazardous materials that
must be disposed of properly and in line with the legal requirements.
Defective or superfluous devices and parts should be disposed of professionally
or taken to your local collection point for hazardous materials.
