VideoJet X10
Configuration Using a Web Browser | en
33
Bosch Security Systems
Installation and Operating Manual
DOC | V4.0 | 2009.06
Time server type
Select the protocol that is supported by the selected time server. Preferably, you should
select the
SNTP server
as the protocol. This supports a high level of accuracy and is required
for special applications and subsequent function extensions.
Select
Time server
for a time server that works with the protocol RFC 868.
5.5
Basic Mode: Network
The settings on this page are used to integrate the VideoJet X10 into an existing network.
Some changes only take effect after the unit is rebooted. In this case, the
Set
button changes
to
Set and Reboot
.
1.
Make the desired changes.
2.
Click the
Set and Reboot
button. The VideoJet X10 is rebooted and the changed settings
are activated.
DHCP
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you
can activate acceptance of IP addresses automatically assigned to the VideoJet X10.
Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration
Manager) use the IP address for the unique assignment of the unit. If you use these
applications, the DHCP server must support the fixed assignment between IP address and
MAC address, and must be appropriately set up so that, once an IP address is assigned, it is
retained each time the system is rebooted.
IP address
Enter the desired IP address for the VideoJet X10 in this field. The IP address must be valid
for the network.
Subnet mask
Enter the appropriate subnet mask for the selected IP address here.
Gateway address
If you want the unit to establish a connection to a remote location in a different subnet, enter
the IP address of the gateway here. Otherwise leave the box blank (
0.0.0.0
).
!
CAUTION!
If you change the IP address, subnet mask or gateway address, the VideoJet X10 is only
available under the new addresses after the reboot.
Summary of Contents for VideoJet X10
Page 1: ...VideoJet X10 Network Video Server en Installation and Operating Manual ...
Page 2: ...VideoJet X10 ...
Page 123: ......
