Bosch VideoJet X10 Installation And Operating Manual Download Page 112

Page: 112 / 124

112

en | Appendix

VideoJet X10

DOC | V4.0 | 2009.06

Installation and Operating Manual

Bosch Security Systems

8.10

Copyrights

The firmware 4.0 uses the fonts "Adobe-Helvetica-Bold-R-Normal--24-240-75-75-P-138-

ISO10646-1" and "Adobe-Helvetica-Bold-R-Normal--12-120-75-75-P-70-ISO10646-1" under the

following copyright:

Permission to use, copy, modify, distribute and sell this software and its documentation for

any purpose and without fee is hereby granted, provided that the above copyright notices

appear in all copies and that both those copyright notices and this permission notice appear

in supporting documentation, and that the names of Adobe Systems and Digital Equipment

Corporation not be used in advertising or publicity pertaining to distribution of the software

without specific, written prior permission.

This software is based in part on the work of the Independent JPEG Group.

Summary of Contents for VideoJet X10





























































































































Search results

Summary of Contents for VideoJet X10

Reviews:

Related manuals for VideoJet X10

Brands by name

Popular brands

Bosch VideoJet X10, Installation And Operating Manual

Search results

Summary of Contents for VideoJet X10

Reviews:

Related manuals for VideoJet X10

Brands by name

Popular brands