18
en | Configuring the VG4-100 Series IP AutoDome
AutoDome Modular Camera System
F01U028033 | 1.0 | 2006.08
VG4-100 Series User’s Manual
Bosch Security Systems, Inc.
Fig. 6.2
Network Settings Page
7.
Configure the settings on this page based on the addresses provided by your local net-
work administrator.
8.
Click the
Set
button to save the settings.
9.
Launch another instance of Microsoft Internet Explorer.
10. Type the original IP address followed by
/reset
(for example,
http://192.168.0.1/reset
) in the address bar and click
Go
to restart the IP
AutoDome. Once you restart the IP AutoDome, use the new IP Address to access the Live-
page.
11. Disconnect the IP AutoDome Ethernet cable from the dedicated network switch and
reconnect the Ethernet cable to the local area network (LAN).
i
NOTICE!
Click on the
Help on this page?
link if you need more information.
