16
en | Configuring the VG4-100 Series IP AutoDome
AutoDome Modular Camera System
F01U028033 | 1.0 | 2006.08
VG4-100 Series User’s Manual
Bosch Security Systems, Inc.
Fig. 6.1
AutoDome IP System Configuration
6.4
Configuring the IP Camera
To operate the camera in your network you must assign it a valid network IP address. The
default IP address is 192.168.0.1, but you may have to change this address if it conflicts with
another device on your network.
To properly configure the camera for your network, you need the following information:
–
Unit IP address: An identifier for the camera on a TCP/IP network. For example,
140.10.2.110 is a valid syntax for an IP address.
–
Subnet mask: A mask used to determine what subnet an IP address belongs to.
–
Gateway IP address: A node on a network that serves as an entrance to another network.
–
Port: An endpoint to a logical connection in TCP/IP and UDP networks. The port number
identifies the use of the port for use through a firewall connection.
The IP AutoDome defaults are as follows:
–
IP Address: 192.168.0.1
–
Subnet Mask: 255.255. 255.0
–
Gateway IP Address: 0.0.0.0
6.4.1
Installing the Required Software
To view live video, you must install Bosch MPEG ActiveX, DirectX, and Java Virtual Machine.
To install the software do the following:
1.
Insert the IP AutoDome software CD into the CD-ROM drive of the computer.
2.
Click the Windows Start button, select Run, and then Browse to the CD drive.
3.
Open the Install folder, then the
MPEG_ActiveX
folder and double click on the
MPE-
GAx.exe
file. Follow the on-screen instructions to install the Bosch MPEG ActiveX.
4.
Open the Tools folder, the
DirectX9
folder, and then the
DirectX9.0c
folder and dou-
ble-click on the
dxsetup.exe
file. Follow the on-screen instructions to install DirectX.
5.
Open the Tools folder, then the Java VM folder and double click on the executable file.
Follow the on-screen instructions to install Java.
PC
IP
IP
Net Switch
AutoDome
PC
IP
AutoDome
A
B
i
NOTICE!
Ensure that the network parameters of your cameras are available before you begin
configuration.
